Author Topic: IST YEAR SYLLABUS AND LESSON PLANS FOR BVCOE  (Read 3699 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr.360

  • Moderator
  • Super Member
  • *
  • Points: 2683
  • Posts: 1187

    • BVP
    • _
      ECE
    • View Profile
IST YEAR SYLLABUS AND LESSON PLANS FOR BVCOE
« on: August 21, 2015, 12:54:32 am »
THEORY PAPERS
Code No.
 
Paper
 
L
 
T/P
 
Credits
 
Status
 
ETMA-101
 
Applied Mathematics-I
 
3
 
1
 
4
 
M
 
ETPH-103
 
Applied Physics-I
 
2
 
1
 
3
 
M
 
ETME-105
 
Manufacturing Processes
 
3
 
0
 
3
 
M
 
ETEE-106
 
Electrical Technology
 
3
 
0
 
3
 
M
 
ETHS-109
 
Human Values & Professional Ethics-I
 
1
 
1
 
1
 
--
 
ETCS-111
 
Fundamentals of Computing
 
2
 
0
 
2
 
--
 
ETCH-100
 
Applied Chemistry
 
2
 
1
 
3
 
--
 
OR
 
 
 
ETEN-300
 
Environmental Studies
 
2
 
1
 
3
 
--
 
PRACTICAL/VIVA VOCE
 
 
 
ETPH-151
 
Applied Physics Lab-I
 
-------
 
2
 
1
 
M
 
ETEC-153
 
Electronic Devices Lab
 
-------
 
2
 
1
 
M
 
ETME-155
 
Workshop Practice
 
-------
 
3
 
2
 
M
 
ETME-157
 
Engineering Graphics Lab
 
-------
 
3
 
2
 
M
 
ETCS-157
 
Fundamentals of Computing Lab
 
-------
 
2
 
1
 
 
 
ETCH-161
 
Applied Chemistry Lab
 
-------
 
2
 
1
 
--
 
OR
 
 
 
ETEN-163
 
Environmental Studies Lab
 
-------
 
2
 
1
 
--
 
ETEN-164
 
NCC/NSS*
 
-------
 
-------
 
-------
 
 
 
 
 
Total
 
16
 
18
 
27
 
 
 
 
ETCH-100 APPLIED CHEMISTRY : ECE/EEE/CIVIL ENGG./TOOL ENGG./ICE
ETEN-300 ENVIRONMENTAL STUDIES : CSE/IT/MECH.ENGG/MAE/ENVIROMENTAL ENGG./POWER ENGG.
*Regulations will be formed for NCC/NSS.
M- Mandatory Paper for the award of degree.
APPLIED MATHEMATICS-I
Paper Code :ETMA-101    LTC
Paper :APPLIED MATHEMATICS-I 314
INSTRUCTIONS TO PAPER SETTERS:
Maximum Marks : 75
    1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It should be of 25 marks.
2. Apart from Question No. 1, rest of the paper shall consist of four units as per the syllabus. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of 10 marks.
     
UNIT-I
12hrs.
           Successive differentiation: Leibnitz theorem for nth derivative (without proof). Infinite series: Convergence and divergence of infinite              series,         positive terms infinite series, necessary condition, comparison test (Limit test), D’Alembert ratio test, Integral Test, Cauchy’s            root test,                         Raabe’s test and Logarithmic test(without proof). Alternating series, Leibnitz test, conditional and absolutely convergence.              Taylor’s and                 Maclaurin’s expansion(without proof) of function ( ex, log(1+x), cos x , sin x) with remainder terms ,Taylor’s and Maclaurin’s        series, Error and              approximation. [T1],[T2]
    UNIT-II
12hrs.
           Asymptotes to Cartesian curves. Radius of curvature and curve tracing for Cartesian, parametric and polar curves. Integration:                                               integration using reduction formula for ,                                . Application of integration : Area under the curve, length of the curve, volumes and surface area of solids of                                 revolution about axis only .Gamma and Beta functions. [T1],[T2]
    UNIT-III
12hrs.
           Matrices: Orthogonal matrix, Hermitian matrix, Skew-Hermitian matrix and Unitary matrix. Inverse of matrix by Gauss-Jordan Method            (without          proof). Rank of matrix by echelon and Normal (canonical) form. Linear dependence and linear independence of vectors.                    Consistency              and inconsistency of linear system of homogeneous and non homogeneous equations . Eigen values and Eigen vectors.          Properties of Eigen          values (without proof). Cayley-Hamilton theorem (without proof). Diagonlization of matrix. Quadratic form, reduction          of quadratic form to                     canonical form. [T1],[T2]
    UNIT-IV
12hrs.
           Ordinary differential equations: First order linear differential equations, Leibnitz and Bernaulli’s equation. Exact differential equations ,                                 Equations reducible to exact differential equations. Linear differential equation of higher order with constant coefficients, Homogeneous          and           non homogeneous differential equations reducible to linear differential equations with constant coefficients. Method of variation of                                       parameters. Bessel’s and Legendre’s equations (without series solutions), Bessel’s and Legendre’s functions and their properties.[T1],          [T2] 
     Text:
[T1] B. S. Grewal,”Higher Engineering Mathematics” Khanna Publications.
[T2]. R. K. Jain and S.R.K. Iyengar,”Advanced Engineering Mathematics “Narosa Publications.
References:
[R1]. E. kresyzig,” Advance Engineering Mathematics”, Wiley publications
[R2]. G.Hadley, “ Linear Algebra” Narosa Publication
[R3]. N.M. Kapoor, “ A Text Book of Differential Equations”, Pitambar publication.
[R4] Wylie R, “ Advance Engineering mathematics” , McGraw-Hill
[R5] Schaum’s Outline on Linear Algebra, Tata McGraw-Hill
[R6] Polking and Arnold, “ Ordinary Differential Equation using MatLab” Pearson.
              APPLIED PHYSICS – I
Paper Code: ETPH – 103   LTC
Paper: APPLIED PHYSICS – I213
INSTRUCTIONS TO PAPER SETTERS:
MAXIMUM MARKS: 75
    1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It should be of 25 marks.
2. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of 12.5 marks.
     Object: The objective of the paper is to facilitate the student with the basics of Applied Physics aspects that are required for his understanding of basic physics.
UNIT I
Interference: Introduction, Interference due to division of wave front: Fresnel’s Biprism, Interference due to division of amplitude: wedge shaped film, Newton’s rings.
Diffraction: Introduction, Difference between Fresnel and Fraunhofer diffraction, Single slit diffraction, Transmission diffraction grating, Absent spectra.
(No. of Hrs. 8)
UNIT II
Polarization: Introduction, Uniaxial crystals, Double refraction, Nicol prism, Quarter and half wave plates, Theory of production of plane, circularly and elliptically polarized lights, Specific rotation, Laurents half shade polarimeter.
Laser: Spontaneous and stimulated emissions, Einstein’s coefficients, Laser and its principle, He-Ne laser.
Fibre optics: Introduction,Single mode fibre, Step index and graded index multimode fibres, Acceptance angle and numerical aperture.
(No. of Hrs. 8)
UNIT III
Theory of Relativity: Introduction, Frame of reference, Galilean transformation, Michelson-Morley experiment, Postulates of special theory of relativity, Lorentz transformations, Length contraction, Time dilation, Mass energy relation
Ultrasonics: Introduction, Production of ultrasonics by magnetostriction and Piezoelectric methods, Applications
(No. of Hrs. 8)
UNIT IV
Nuclear Physics: Introduction,Radioactivity, Alpha decay, Beta decay, Gamma decay, Q value, Threshold energy, Nuclear reactions, Nuclear fission: Liquid drop model, Nuclear fusion, Particle accelerators: Linear accelerator, Cyclotron, Radiation detectors: Ionization chamber, Geiger Mueller Counter.
(No. of Hrs. 8)
Text Books:
[T1]. Arthur Beiser, ‘Concepts of Modern Physics’, [McGraw-Hill], 6th Edition 2009
[T2] H.K. Malik & A. K. Singh ‘Engineering Physics’ [McGraw-Hill], 1st Edition, 2009.
Reference Books
[R1]. A. Ghatak ‘Optics’ , TMH, 5th Edition, 2013
[R2]. G. Aruldhas ‘Engineering Physics’ PHI 1st Edition, 2010.
[R3]. Fundamentals of Optics : Jenkins and White , Latest Edition
[R4]. C. Kittle, “Mechanics”, Berkeley Physics Course, Vol.- I.
[R5]. Feynman “ The Feynman lectures on Physics Pearson Volume 3 Millennium Edition, 2013
[R6]. Uma Mukhrji ‘Engineering Physics’ Narosa, 3rd Edition, 2010.
[R7]. A. S.Vasudeva, ‘Modern Engineering Physics’, S. Chand, 6th Edition, 2013.
MANUFACTURING PROCESSES
Paper Code: ETME 105 LTC
Paper: Manufacturing Processes303
INSTRUCTIONS TO PAPER SETTERS:
MAXIMUM MARKS: 75
    1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It should be of 25 marks.
2. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of 12.5 marks.
     Unit-I Introduction: Introduction of Manufacturing processes and their classification, Basic Metals & Alloys : Properties and Applications. Properties of Materials: Strength, elasticity, stiffness, malleability, ductility, brittleness, toughness and hardness. Ferrous Materials: Carbon steels, its classification based on % carbon as low, mild, medium & high carbon steel, its properties & applications. Wrought iron. Cast iron. Alloy steels: stainless steel, tool steel. Elementary introduction to Heat- treatment of carbon steels: annealing, normalizing, quenching & tempering and case- hardening.
 Non-Ferrous metals & alloys: Properties and uses of various non-ferrous metals & alloys and its composition such as Cu-alloys: Brass, Bronze, Al-alloys such as Duralumin.

Casting Processes: Principles of metal casting, Pattern materials, types and allowance, composition and properties of moulding sand, foundry tools, concept of cores and core print, elements of gating system, description and operation of cupola, special casting processes e.g. die-casting; permanent mould casting; centrifugal casting; investment casting; casting defects. [No. of Hrs.12 ] (1 , 2, R1, R2, R3, R4, R5)
 Unit-II Smithy and Forging: Hot working and cold working, Forging tools and equipments, Forging operations, Forging types: Smith forging, Drop forging, Press forging, Machine forging; Forging defects; Extrusion, wire drawing, swaging.
Bench Work and Fitting:  Fitting shop tools, operation: Fitting; sawing; chipping; thread cutting (with taps and dies); Marking and marking tools. [No. of Hrs. 12 ] (1 , 2, R1, R2, R3, R4, R5)
 Unit-III Metal joining: Welding principles, classification of welding techniques, Oxyacetylene Gas welding, equipment and field of application, Arc-welding, metal arc, Carbon arc welding, submerged arc welding and atomic hydrogen welding, TIG and MIG welding, Electric resistance welding: spot; seam; flash; butt and percussion welding, Flux: composition; properties and function, Electrodes, Types of joints and edge preparation, Brazing and soldering, welding defects.
[No. of Hrs. 12 ] (1 , 2, R1, R2, R3, R4, R5)
 Unit-IV Sheet Metal Work: Tools and equipments used in sheet metal work, metals used for sheets, standard specification for sheets, Types of sheet metal operations: shearing, drawing, bending. Other operations like spinning, stretch forming, embossing and coining.
Powder Metallurgy: Introduction of powder metallurgy process: powder production, blending, compaction, sintering.
[No. of Hrs. 12 ] (1 , 2, R1, R2, R3, R4, R5)
 
Text Books:
1. Manufacturing Process by Raghuvanshi.(Dhanpat Rai and Co.)
T2. Manufacturing Technology by P.N.Rao (TMH publications)
Reference Books:
R1.  Workshop Technology by Hazra-Chowdhary (Media Promoters and Publishers Pvt. Ltd.)
R2.  Production Engineering by R.K.Jain (Khanna Publishers)
R3.  Workshop Technology by Chapman (Elsevier Butterworth-Heinemann)
R4.   Fundamentals of Modern Manufacturing by Mikell P. Groover (Wiley India Edition)
R5.   Manufacturing Processes for Engineering Materials by Kalpakjian and Schmid (Pearson)
ELECTRICAL TECHNOLOGY 
ELECTRICAL TECHNOLOGY    L          T          C
Paper Code: ETEE-106                                                                   
 
3          0          3
INSTRUCTIONS TO PAPER SETTERS:                                                         MAXIMUM MARKS: 75
 
  • This is first introductory course in electrical technology to the students of all the branches of engineering in first year.
  • Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It should be of 25 marks.
  • Apart from question no. 1, rest of the paper shall consist of four units as per the syllabus. Every unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of 12.5 marks.
Objective of the syllabus: To provide exposure to the students in respects of the basics of different aspects of electrical engineering with emphasis on constructional, measurement and applications of various types of instruments and equipments.
 
UNIT – I DC Circuits
Introduction of Circuit parameters and energy sources (Dependent and Independent), Mesh and Nodal Analysis, Superposition, Thevenin’s, Norton’s, Reciprocity, Maximum Power Transfer and Millman’s Theorems, Star-Delta Transformation and their Applications to the Analysis of DC circuits. [T1],[T2] [No. of Hrs. 10]
UNIT – II A.C.Circuits
A.C. Fundamentals, Phasor representation, Steady State Response of Series and Parallel R-L, R-C and R-L-C circuits using j-notation, Series and Parallel resonance of RLC Circuits, Quality factor, Bandwidth, Complex Power, Introduction to balanced 3-phase circuits with Star- Delta Connections. [T1],[T2] [No. of Hrs. 14]
UNIT – III Measuring Instruments
Basics of measuring instruments and their types ,Working principles and applications of moving coil, moving iron (ammeter & voltmeter) and Extension of their ranges, dynamometer- type Wattmeter , induction-type Energy Meter , Two-wattmeter method for the measurement of power in three phase circuits, Introduction to digital voltmeter, digital Multimeter and Electronic Energy Meter. [T1],[T2],[R2] [No. of Hrs. 10]
UNIT – IV Transformer and Rotating Machines
Fundamentals of Magnetic Circuits, Hysteresis and Eddy current losses, working principle, equivalent circuit, efficiency and voltage regulation of single phase transformer and its applications.
Introduction to DC and Induction motors (both three phase and single phase), Stepper Motor and Permanent Magnet Brushless DC Motor. [T1],[T2],[R2] [No. of Hrs. 12]
TEXT BOOKS:
[T1] S.N Singh “Basic Electrical Engineering” PHI India Ed 2012
[T2] Chakrabarti,Chanda,Nath “Basic Electrical Engineering” TMH India”, Ed 2012.
Reference Books:
[R1] William Hayt “Engineering Circuit Analysis” TMH India Ed 2012
[R2] Giorgio Rizzoni “Principles and Application of Electrical Engineering” Fifth Edition TMH India.
HUMAN VALUES & PROFESSIONAL ETHICS
Human Values & Professional Ethics L   T    C
Paper Code: ETHS-1091     1     1
Paper: Human Values and Professional Ethics                                                                                 Non-University Examination Scheme (NUES)
Note: There will be no End-Term External University Examination. Marks are to be given on the basis of two internal sessional test of 30 marks each and one final Viva-voce project report Examination of 40 marks.
Course Objectives
This introductory course input is intended:
 
  • To help the students appreciate the essential complementarity between ‘VALUES’ and ‘SKILLS’ to ensure sustained happiness and prosperity which are the core aspirations of all human beings.
  • To facilitate the development of a holistic perspective among students towards life, profession and happiness, based on the correct understanding of the Human reality and the rest of the Existence. Such a Holistic perspective forms the basis of value-based living in a natural way.
  • To highlight plausible implications of such a Holistic understanding in terms of ethical human conduct, trustful and mutually satisfying human behavior and mutually enriching interaction with Nature.
 
Unit 1: Introduction to Value Education
1. Understanding the need, basic guidelines, content and process for value education.
2. Basic Human Aspirations: Prosperity and happiness
3. Methods to fulfil the human aspirations – understanding and living in harmony at various levels.
4. Practice Session – 1. [T1],[R1],[R4]
No. of lectures: 03+1
Unit 2: Harmony in the Human Being
1. Co-existence of the sentient “I” and the material body – understanding their needs – Happiness & Conveniences.
2. Understanding the Harmony of “I” with the body – Correct appraisal of physical needs and the meaning of prosperity.
3. Programme to ensure harmony of “I” and Body-Mental and Physical health and happiness.
4. Harmony in family and society: Understanding Human-human relationship in terms of mutual trust and respect.
5. Understanding society and nation as extensions of family and society respectively.
6. Practice Session – 02 [T2],[R1],[R2]
No. of lectures: 05+1
Unit 3: Basics of Professional Ethics
1. Ethical Human Conduct – based on acceptance of basic human values.
2. Humanistic Constitution and universal human order – skills, sincerity and fidelity.
3. To identify the scope and characteristics of people – friendly and eco-friendly production system, Technologies and management systems.
4. Practice Session – 03. [T1],[R4]
No. of lectures: 04+1
Unit 4: Professional Ethics in practice
1. Profession and Professionalism – Professional Accountability, Roles of a professional, Ethics and image of profession.
2. Engineering Profession and Ethics - Technology and society, Ethical obligations of Engineering professionals, Roles of Engineers in industry, society, nation and the world.
3. Professional Responsibilities – Collegiality, Loyalty, Confidentiality, Conflict of Interest, Whistle Blowing
4. Practice Session – 04 [T1], [T2], [T3], [R3]
No. of lectures: 04+1
Text Books:
[T1] Professional Ethics, R. Subramanian, Oxford University Press.
[T2] Fundamentals of Ethics, Edmond G. Seebauer & Robert L. Barry, Oxford University Press.
[T3] Ethics in Engineering Mike W. Martin, Department of Philosophy, Chapman University and Roland Schinzinger, School of Engineering, University of California, Irvine.
References:
[R1] Success Secrets for Engineering Students: Prof. K.V. SubbaRaju, Ph.D., Published by SMARTstudent.
[R2] Human Values: A. N. Tripathy (2003, New Age International Publishers)
[R3] Value Education website, http.//www.universalhumanvalues.info[16]
[R4] Professional Ethics & Human Values: S.B. Srivasthva, SciTech Publications (India) Pvt. Ltd. New Delhi.
[R5] Human Values and Professional Ethics: R. R. Gaur, R. Sangal and G. P. Bagaria, Eecel Books (2010, New Delhi). Also, the Teachers Manual by the same author.


APPLIED CHEMISTRY
Applied ChemistryL T C
Paper Code: ETCH – 100 /200 2 1 3
Instructions to Paper Setter:Maximum Marks: 75
1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It should be of 25 marks.
2. Each unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of 12.5 marks
 
UNIT I: FUELS
Definition, Classification & Calorific value of fuels (gross and net), Dulong’s formula (Numericals), Determination of calorific value of fuels using bomb’s calorimeter (Numericals), Determination of calorific value of fuels using Boy’s Gas Calorimeter (Numericals), Cracking – Thermal & catalytic cracking, Octane & Cetane numbers with their significance. High & Low temperature carbonization, Manufacture of coke (Otto – Hoffmann oven) Proximate and ultimate analysis of Coal (Numericals) Combustion of fuels (Numericals).[T1,T2][No. of hrs. 08]
UNIT II: THE PHASE RULE & CATALYSIS
Definition of various terms, Gibb’s Phase rule & its derivation, Application of phase rule to One component system- The water system, Application of phase rule to Two component system- The Lead-Silver system (Pattinson’s process).
Catalyst and its characteristics, Types of catalysts, Concept of promoters, inhibitors and poisons. Theories of catalysis: Intermediate compound formation theory, adsorption or contact theory. Application of catalysts for industrially important processes Enzyme catalysis: Characteristics, Kinetics & Mechanism of enzyme catalysed reaction ( Michaelis-Menten equation), Acid-Base catalysis: Types, Kinetics & Mechanism, Catalysis by metals salts (Wilkinson’s Catalyst), Auto-catalysis, Heterogeneous catalysis (Langmuir-Hinshelwood mechanism.[T1,T2] [No. of hrs. 08]
 
UNIT III: WATER
Introduction and specifications of water , Hardness and its determination by EDTA method (Numericals), Alkalinity and its determination (Numericals), Reverse Osmosis, Electrodialysis, Disinfection by break-point chlorination. Boiler feed water, boiler problems– scale, sludge, priming & foaming: causes & prevention, Boiler problems– caustic embrittlement & corrosion: causes & prevention, Water Softening by Internal Treatment: carbonate & phosphate conditioning, colloidal conditioning & calgon treatment Water Softening by External Treatment: Lime-Soda Process (Numericals) Zeolite & Ion-Exchange Process. [T1,T2] [No. of hrs. 08]

 UNIT IV: CORROSION & ITS CONTROL
Causes, effects & consequences; Chemical or Dry corrosion & its mechanism  (Pilling-Bedworth Rule) Electrochemial or Wet Corrosion & Its mechanism, Rusting of Iron Passivity, Galvanic series, Galvanic Corrosion, Soil Corrosion Pitting Corrosion, Concentration Cell or Differential Aeration Corrosion, Stress Corrosion. Factors Influencing Corrosion: Nature of metal and nature of corroding environment; Protective measures: Galvanization, Tinning Cathodic Protection, Sacrificial Anodic protection, Electroplating, Electroless plating, Prevention of Corrosion by Material selection & Design. [T1,T2] [No. of hrs. 08]
 Text Books:
[T1] P. C. Jain & Monika Jain, Engineering Chemistry, Latest edition, Dhanpat Rai Publishing Co., 2002.
[T2] P. Mathew, Advance Chemistry, 1 & 2 Combined Editions, Cambridge University Press, 2003.
Reference Books:
[R1] P. W. Atkins and J. De Paula, Atkins’ Physical Chemistry, Oxford, 2010.
[R2] T. Engel and P. Reid, Physical Chemistry,Pearson Education, 2013.
[R3] K. Qanungo, Engineering Chemistry, PHI Learning Private Limited, New Delhi, 2009.
[R4] O. G. Palanna, Engineering Chemistry, Tata McGraw Hill Education Private Limited, 2012.
[R5] D. A. Jones, Principles and Prevention of Corrosion, Prentice Hall, 2nd Edition, 1996.
[R6] H. K. Chopra and A. Parmar, Engineering Chemistry- A Text Book, Narosa Publishing House, 2012.
[R7] S. Chawla, Engineering Chemistry-All India Edition, Dhanpat Rai & Co., 2003.
[R8] R. Gadi, S. Rattan and S. Mohapatra, Environmental Studies, S.K. Kataria & Sons, 2nd Edition 2009.
 
[OR]
ENVIRONMENTAL STUDIES
ENVIRONMENTAL STUDIES
 
L T C 
Paper Code: ETEN-300/400 2 1 3
Instructions to Paper Setter: Maximum Marks: 75
1. Question No. 1 should be compulsory and cover the entire syllabus. This question should have objective or short answer type questions. It should be of 25 marks.
2. Each unit should have two questions. However, student may be asked to attempt only 1 question from each unit. Each question should be of 12.5 marks.
Objective: The objective of this course is to make students environment conscious. They will be exposed through the fundamental concepts of environment and ecosystem so that they can appreciate the importance of individual and collective efforts to preserve and protect our environment. This course must raise various questions in student’s mind that how our environment is inter dependent on various factors and how human being must care for their natural surroundings.
 
UNIT I: Environmental Studies: Ecosystems, Bio-diversity and its Conservation
(i) The Multidisciplinary Nature of Environmental Studies-
Definition, scope and importance of Environmental Studies. Biotic and a biotic component of environment, need for environmental awareness.
(ii) Ecosystems
Concept of an ecosystem, structure and function of an ecosystem, producers, consumers and decomposers, energy flow in the ecosystem, ecological succession, food chains, food webs and ecological pyramids.
Introduction, types, characteristic features, structures and function of the following ecosystem:
(a) Forest ecosystem
(b) Grassland ecosystem
(c) Desert ecosystem
(d) Aquatic ecosystem (ponds, streams, lakes, rivers, oceans, estuaries).
(iii) Bio-diversity and its Conservation
Introduction to biodiversity —definition: genetic, species and ecosystem diversity, Bio-geographical classification of India, Value of biodiversity: Consumptive use, productive use, social, ethical, aesthetic and option values, Biodiversity at global, national and local levels, India as a mega-diversity nation, Hot-spots of biodiversity, Threats to biodiversity : Habitat loss, Poaching of wildlife, man-wildlife conflicts, rare endangered and threatened species(RET) endemic species of India, method of biodiversity conservation: In-situ and ex-situ conservation.                                                                                                                               [No. of hrs. 10]
 
UNIT II: Natural Resources: problems and prospects
 
  • Renewable and Non-renewable Natural Resources
Concept and definition of Natural Resources and need for their management
 
  • Forest resources:Use and over-exploitation, deforestation, case studies, timber extraction, mining, dams and their effects on forests and tribal people.
  • Water resources:Use and over-utilization of surface and ground water, floods, drought, conflicts over water, dams-benefits and problems, Water conservation, rain water harvesting, watershed management.
  • Mineral resources:Uses are exploitation, environmental effects of extracting and using mineral resources, case studies.
  • Food resources:World food problems, changes causes by agriculture and over-grazing, effects of modern agriculture, fertilizer-pesticide problems, water logging, salinity, case studies.
  • Energy resources:Growing energy needs, renewable and non-renewable energy sources, use of alternate energy sources, Urban problems related to energy, case studies.
  • Land resources:Land as a resource, land degradation, man induced landslides, soil erosion and desertification.
     [No. of hrs. 10]
UNIT III: Environmental Chemistry and Pollution Control
(i) Chemistry of Environment
 
  • Green Technology
Principles of Green technology, Zero Waste Technology, Green Chemistry & Its basic principles, Atom Economy, Green Methodologies. clean development mechanisms (CDM), concept of environmental impact assessment,
                                                                                                                     
 
  • Eco-Friendly polymers
Environmental degradation of polymers, Biodegradable, Photo-biodegradable polymers,             Hydrolysis & Hydrobiodegradable, Biopolymers & Bioplastics: polylactic acid,             polyhydroxybutyrate, polycaprolactone,. Concept of bioremediation.
(ii)Environmental Pollution
Definition, types, causes, effects and control measures of (a) Air pollution, (b) Water pollution, (c) Soil pollution, (d) Marine pollution, (e) Noise pollution, (f) Thermal pollution, (g) Nuclear hazards. Pollution case studies. Solid waste and its management: causes, effects and control measures of urban and industrial waste.
Chemical toxicology-Terms related to toxicity, impact of chemicals (Hg, As, Cd, Cr, Pb) on environment.
[No. of hrs. 10]

UNIT IV: Disaster Management, Social Issues, Human Population and the Environment
(i) Disaster Management
Disaster management: floods, earthquake, cyclone and land-slides, nuclear accidents and holocaust, case studies.
(ii) Social Issues, Human Population and the Environment
Sustainable development, Climate change, global warming, acid rain, ozone layer depletion, Environmental ethics: Issues and possible solutions, Consumerism and waste products, , Wasteland reclamation. Population growth, problems of urbanisation.
Environment Protection Act, 1986; Air (Prevention and Control of Pollution) Act, 1981; Water (Prevention and Control of Pollution) Act, 1974; Wildlife Protection Act, 1972; Forest Conservation Act, 1980; Environmental management system standards-ISO 14000 series.                                       
[No. of hrs. 10]

Text Books:
[T1] E. Barucha, Textbook of Environmental Studies for Undergraduate Courses,
Universities Press (India) Pvt. Ltd., 2005.
[T2] S. Chawla, A Textbook of Environmental Studies, McGraw Hill Education Private Limited, 2012
Reference Books:
[R1] G. T. Miller, Environmental Science, Thomas Learning, 2012
[R2] W. Cunningham and M. A. Cunningham, Principles of Environment Science: Enquiry and Applications, Tata McGraw Hill Publication, N. Delhi, 2003.
[R3] R. Rajagopalan, Environmental Studies: From Crisis to Cure, 2nd Edition, Oxford University Press, 2011.
[R4] A.K. De, Environmental Chemistry, New Age Int. Publ. 2012,,
[R5] A. Kaushik and C.P. Kaushik, Perspectives in Environment Studies, 4th Edition, New Age International Publishers,2013
[R6] Environmental Engineering by Gerard Kiely, Tata McGraw-Hill Publishing Company Ltd., New Delhi, 2010.
PRACTICAL/VIVA VOCE
APPLIED PHYSICS LAB – I
Paper Code: ETPH-151 P C
Paper: APPLIED PHYSICS LAB – I2 1
List of Experiments
  • To determine the wavelength of sodium light by Newton’s Rings.
  • To determine the wavelength of sodium light by Fresnel's biprism.
  • To determine the wavelength of sodium light using diffraction grating.
  • To determine the refractive index of a prism using spectrometer.
  • To determine the dispersive power of prism using spectrometer and mercury source.
  • To determine the specific rotation of cane sugar solution with the help of half shade polarimeter.
  • To find the wavelength of He-Ne laser using transmission diffraction grating.
  • To determine the numeral aperture (NA) of an optical fibre.
  • To plot a graph between the distance of the knife-edge from the center of the gravity and the time period of bar pendulum. From the graph, find
           (a) The acceleration due to gravity
          (b) The radius of gyration and the moment of inertia of the bar about an axis.
     10. To determine the velocity of ultrasound waves using an ultrasonic spectrometer in a given liquid (Kerosene Oil).
     11. To verify inverse square law.
      12. To determine Planck’s constant.
Text Books:
[T1] C. L. Arora ‘B. Sc. Practical Physics’ S. Chand
      Note: Any 8-10 experiments out of the list may be chosen. Proper error – analysis must be carried out with all the experiments.
(Electrical Technology Lab)
Paper Code: ETEE 156                                                                     L          P          C
Paper: Electrical Technology Lab                                                    0          2          1
List of Experiments
 
  • To Design the circuit for a given load and selection of its various Components and instruments from the safety point of view
OR
To study different types of symbols and standard currently being used in electrical engineering.
 
  • Study and applications of CRO for measurement of voltage, frequency and phase of signals.
  • Connection of lamp by
(1)Single Switch Method.(2) Two-way Switch Method.
OR
Performance comparison of of fluorescent Tube & CFL Lamp.
 
  • To Verify Thevenin’s & Norton’s Theorem
OR
To Verify Superposition &Reciprocity Theorem.
OR
To Verify Maximum Power Transfer Theorem.
 
  • To Measure Power & Power Factor in a Single-Phase A.C Circuit using Three Ammeters or three Voltmeters.
  • To Measure Power & Power Factor in a Balanced Three Phase Circuit using Two Single Phase Wattcmeters.
  • To study of Resonance in a series R-L-C or Parallel R-L-C Circuits.
  • To perform open circuit and short circuit test on 1-phase transformer.
  • Starting, Reversing and speed control of DC shunt Motor
  • Starting, Reversing and speed control of 3-phase Induction Motor
  • To Study different types of Storage Batteries & its charging system.
  • .To Study different types of earthing methods including earth leakage circuit breaker (GFCI)
Workshop Practice
Paper Code: ETME-155P C
Paper: Workshop Practice3 2
List of experiments
Sheet Metal Shop
1.To study the tools and machineries used in sheet metal shop.
2.To make a tray using sheet metal tools.
3. To make a Funnel using sheet metal tools.
4. To make a cylindrical mug in sheet metal shop.
Foundry Shop
5. To make a mould in Foundry Shop.
Carpentry Shop
6. To make a half lap T-joint in Carpentry Shop.
7. To make a half cross lap joint in Carpentry Shop.
8. To make a pattern using Carpentry Tools.
Welding Shop
9. To study arc and gas welding equipments and tools.
10. To make Lap Joint, T-Joint and Butt Joint in Welding shop.
Fitting Shop
11. To make V-Section and T-Slot in fitting shop.
Machine Shop
12. To study basic operations on lathe, shaper, milling, drilling and grinding machines..
13. To perform step turning, knurling and threading operations on lathe.
14. To prepare a simple job on shaper.
Engineering Graphics

 
Paper Code: ETME-157 P C
Paper: Engineering Graphics Lab 3 2
UNIT - I
General: Importance, Significance and scope of engineering drawing, Lettering, Dimensioning, Scales, Sense of proportioning, Different types of projections, Orthographic Projection, B.I.S. Specifications,
Projections of Point and Lines: Introduction of planes of projection, Reference and auxiliary planes, projections of points and Lines in different quadrants, traces, inclinations, and true lengths of the lines, projections on Auxiliary planes, shortest distance, intersecting and non-intersecting lines.(T1, T2, R1, R2 , R3 )
Unit - II
Planes other than the Reference Planes: Introduction of other planes (perpendicular and oblique), their traces, inclinations etc., Projections of points and lines lying in the planes, conversion of oblique plane into auxiliary Plane and solution of related problems.
 Projections of Plane Figures: Different cases of plane figures (of different shapes) making different angles with one or both reference planes and lines lying in the plane figures making different given angles (with one of both reference planes). Obtaining true shape of the plane figure by projection.(T1, T2, R1, R2 , R3)
 Unit - III
Projection of Solids: Simple cases when solid are placed in different positions, Axis faces and lines lying in the faces of the solid making given angles. (T1, T2, R1, R2 , R3)
Unit-IV
Isometric Projection of plain surface and bodies. (T1, T2, R1, R2 , R3)
Text Books:
T1 Engineering drawing by N.D.Bhatt (Charotar Publications).
T2 Engineering Drawing by S.C.Sharma & Navin Kumar (Galgotia Publications)
Reference Books:
R1 Engineering Drawing by Venugopalan.
 R2 Engineering Drawing by P.S.Gill R3 Engineering Graphics by K.C.John (PHI)
Fundamental of Computing Lab
Paper Code :ETCS 157P C
Fundamental of Computing Lab2 1
For program development an IDE e.g. CodeBlock[a] , Eclipse CDT , Netbeans[c] is recommended
 
  • Dismantling a PC Part -1
  • Dismantling a PC Part -2
  • Internal and External commands of DOS
  • System utilities of windows including regedit
  • Installation of any rpm or debianlinux distribution with emphasis on drive partitioning
  • Installation of rpm and deb based packages
  • Understanding of File system of Linux
  • Creating user and group ( through CLI)
  • Understanding and working knowledge of .Libre / Open Office Writer
: Editing and Reviewing, Drawing, Tables, Graphs, Templates
 
  • Understanding and working knowledge of Libre / Open Office Calc
  • Understanding and working knowledge Libre / Open Office Impress
  • Understanding of flow chart development through Dia *
  • Two Mini Projects based on the skills learned in experiments 1-12
Applied Chemistry Lab
Paper Code –ETCH-161/260
P:  2       C: 1
LIST OF EXPERIMENTS
  • Determination of alkalinity of water sample.
  • Determination of hardness of water sample by EDTA method.
  • Determine the percentage composition of sodium hydroxide in the given mixture of sodium hydroxide and sodium chloride.
  • Determine the amount of oxalic acid and Sulphuric acid in one litre of solution, given standard sodium hydroxide and Potassium Permanganate.
  • Determine the amount of copper in the copper ore solution, provided hypo-solution (Iodometric Titration).
  • Determine the amount of chloride ions present in water using silver nitrate (Mohr’s Precipitation Method).
  • Determine the strength of MgSO4 solution by Complexometric titration.
  • Determine the surface tension of a liquid using drop number method.
  • Determine the viscosity of a given liquid (density to be determined).
  • Determine the cell constant of conductivity cell and titration of strong acid/strong base conductometrically.
  • To determine (a) λ max of the solution of KMnO4. (b) Verify Beer’s law and find out the concentration of unknown solution by spectrophotometer.
  • Determination of the concentration of iron in water sample by using spectrophotometer.
  • Determination of the concentration of Iron (III) by complexometric titration.
  • Proximate analysis of coal.
  • Determination of eutectic point and congruent melting point for a two component system by method of cooling curve.
  (At least 8 to 10 experiments are to be performed)
Suggested Books:
1. A. I. Vogel, G. H. Jeffery, Vogel’s Text Book of Quantitative Chemical Analysis, Published by Longman Scientific & Technical, 5th Edition, 1989.
2. S. Chawla, Essentials of Experimental Engineering Chemistry, Dhanpat Rai & Co., 3rd Edition, 2008.
3. S. Rattan, Experiments in Applied Chemistry, Published by S.K.Kataria & Sons, 2nd Edition, 2003.
4. O. P. Pandey, D. N. Bajpai and S. Giri, Practical Chemistry,Published by S. Chand, 2005.
5. M. S. Kaurav, Engineering Chemistry with Laboratory Experiments, Published by PHI Learning Private Limited, 2011.
6. S. K. Bhasin and Sudha Rani, Laboratory Manual on Engineering Chemistry, Published by Dhanpat Rai Publishing Company, 2006.
OR
Environmental Studies Lab
Paper Code –ETEM-163/262
P: 2    C: 1
    LIST OF EXPERIMENTS
  • Determination of pH, conductivity and turbidity in drinking water sample.
  • Determination of pH and conductivity of soil/sludge samples.
  • Determination of moisture content of soil sample.
  • Determination of Total Dissolved Solids (TDS) of water sample.
  • Determination of dissolved oxygen (DO) in the water sample.
  • Determination of Biological oxygen demand (BOD) in the water sample.
  • Determination of Chemical oxygen demand (COD) in the water sample.
  • Determination of Residual Chlorine in the water sample.
  • Determination of ammonia in the water sample.
  • Determination of carbon dioxide in the water sample.
  • Determination of nitrate ions or sulphate ions in water using spectrophotometer.
  • Determination of the molecular weight of polystyrene sample using viscometer method.
  • Base catalyzed aldol  condensation by Green Methodology.
  • Acetylation of primary amines using eco-friendly method.     
  • To determine the concentration of particulate matter in the ambient air using High Volume Sampler.
(At least 8 to 10 experiments are to be performed)
P.S.: For better understanding of various aspects of environment visits to local areas, depending upon easy access and importance may be planned to any nearby river, forest, grassland, hills and students should write a report based on their observations.
Suggested Books:
1. A. I. Vogel, G. H. Jeffery, Vogel’s Text Book of Quantitative Chemical Analysis, Published by Longman Scientific & Technical, 5th Edition, 1989.
2. dst.gov.in/green-chem.pdf (monograph of green chemistry laboratory experiments).
3. S. Chawla, Essentials of Experimental Engineering Chemistry, Dhanpat Rai & Co., 3rd Edition, 2008.
4. S. Rattan, Experiments in Applied Chemistry, Published by S.K.Kataria & Sons, 2nd Edition, 2003.
5. W. Cunningham and M. A. Cunningham, Principles of Environment Science: Enquiry and Applications, Tata McGraw Hill Publication, N. Delhi, 2003.
6. A. Kaushik and C. P. Kaushik, Perspectives in Environment Studies, 4th Edition, New Age International Publishers, 2013.

 
 
 
You do not have permission to give points
point 2 Points

Users who gave points in this topic » sahil4161 (2 Pts) 

Offline pK12

  • Super Member
  • *
  • Points: 1172
  • Posts: 578

    • BVP
    • _
      IT
    • View Profile
Re: IST YEAR SYLLABUS AND LESSON PLANS FOR BVCOE
« Reply #1 on: August 21, 2015, 09:34:47 am »
You just copied the syllabus here instead you could simply share link of pdf. You should have posted this in 1st sem. Nothing of this related to specifically with BVCOE.

Lesson plan is the schedule of your classes for each topic. For example "There will 5 classes for Interference in Physics".

Offline Mr.360

  • Moderator
  • Super Member
  • *
  • Points: 2683
  • Posts: 1187

    • BVP
    • _
      ECE
    • View Profile
Re: IST YEAR SYLLABUS AND LESSON PLANS FOR BVCOE
« Reply #2 on: August 21, 2015, 04:32:57 pm »
You just copied the syllabus here instead you could simply share link of pdf. You should have posted this in 1st sem. Nothing of this related to specifically with BVCOE.

Lesson plan is the schedule of your classes for each topic. For example "There will 5 classes for Interference in Physics".
Bro ye hame kal apllied science ki hod ne diya tha  :| I thought it will be useful for other  O:)

Offline Dr.House

  • Moderator
  • Super Member
  • *
  • Points: 3059
  • Posts: 808
  • Bazinga!!!!

    • MAIT
    • _
      CSE
    • View Profile
Re: IST YEAR SYLLABUS AND LESSON PLANS FOR BVCOE
« Reply #3 on: August 22, 2015, 10:49:09 am »
Its the same as the syllabus provided by the university....nothing different..please restrain from repetition.

Offline Mr.360

  • Moderator
  • Super Member
  • *
  • Points: 2683
  • Posts: 1187

    • BVP
    • _
      ECE
    • View Profile
Re: IST YEAR SYLLABUS AND LESSON PLANS FOR BVCOE
« Reply #4 on: August 22, 2015, 02:35:35 pm »
Its the same as the syllabus provided by the university....nothing different..please restrain from repetition.
Okk 

 

Anyone who is starting ECE 2nd shift or 1st shift this year i.e 2017

Started by imarchit19

Replies: 2
Views: 44193
Last post July 29, 2017, 11:59:50 pm
by Souravgouri
NEW COLLEGE TIMINGS FOR 2015-16 Academic Year

Started by RAYAN FOSTER

Replies: 10
Views: 3225
Last post August 03, 2015, 02:48:35 pm
by pK12
Any ECE 2nd year or Lateral entry students (Evening) here?

Started by Souravgouri

Replies: 1
Views: 9992
Last post July 26, 2017, 10:33:21 am
by imarchit19
bvp fee submission notice for 2nd/3rd/4th year

Started by Mr.360

Replies: 0
Views: 745
Last post August 01, 2016, 09:02:54 pm
by Mr.360
IInd Year LCD Presentation

Started by hoopyfrood

Replies: 3
Views: 29322
Last post September 03, 2016, 09:58:06 pm
by RAYAN FOSTER
Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49